A good layout is not about where cabinets look nice — it is about where your body goes a hundred times a day. Here is how to turn your measurements into a plan that flows, then see it in 3D before you commit a dollar.
You already have the hard numbers from measuring. Design is where they become a place to cook. The goal is not a pretty drawing — it is a kitchen where the fridge, the sink and the stove sit a comfortable few steps apart, where the corner is not dead space, and where the thing you reach for is where your hand expects it.
What they search at midnight “kitchen work triangle” — it’s an old rule for one good reason: it still works.
Draw a line between your three workhorses — sink, stove and fridge. Keep each leg roughly 4 to 9 feet, and keep the triangle out of the main walkway. Around those three points sit the zones your day actually uses: a prep zone (counter + knives + boards near the sink), a cook zone (pots and oils by the stove), a clean zone (sink, dishwasher, bin), and a store zone (pantry, dishes near where they are used).
Two numbers keep the triangle honest. Each leg 4–9 feet, and the three legs added together somewhere between 13 and 26 feet. Come in under 13 ft and the three stations crowd each other — you cannot have the oven door and the dishwasher open at the same time. Go past 26 ft and you walk a small marathon per meal. The third rule has no number at all: nothing should route through the triangle. If the path from the back door to the hallway cuts between the sink and the stove, the kitchen will irritate you every day of its life, however good the cabinets are.
What they search at midnight “small kitchen layout / L-shaped vs U-shaped” — the room usually picks for you; here’s how to read it.
Do not start from a blank rectangle. Flip’s planner ships ready layout templates — single, L, U, G and island — so you begin from a working shape and adjust, instead of guessing from scratch.
The island is where DIY layouts most often go wrong, because it is asked to do everything at once — prep and cooking and the sink and seating — and ends up doing none of them well. Pick one primary function and let the rest be surface: prep island, cooking island, sink island, or a plain worktop with stools. Two functions means someone chopping into someone else’s elbow.
The practical gates, in order: you need 36–42″ of clear walkway on every side you use (42″ on the working sides, 36″ is the absolute floor on a wall side), which in a typical kitchen means a room at least 12 ft wide before an island is even possible. A useful island starts around 4′ × 2′; anything smaller is a cart. And if the island takes the sink or the cooktop, you are committing to running plumbing, power or gas — and ducting — through the floor, which is the one line item that turns an island from a cabinet decision into a trades decision. Decide that now, not after the concrete is poured or the joists are closed up.
What they search at midnight “blind corner cabinet solutions” — the corner is where storage goes to die — unless you plan it.
Where two runs meet, a plain cabinet buries a cubic foot of storage you can never reach. The fixes: a lazy Susan (a rotating shelf that brings the back to the front), a blind-corner pull-out (trays that swing the hidden half out to you), or a diagonal corner cabinet that simply faces the corner. Decide this at design time — retrofitting a corner solution later is painful.
What they search at midnight “drawers vs doors kitchen cabinets” — for base cabinets, drawers win more often than people expect.
Counters land at about 36″, wall cabinets start 15–18″ above them (bottoms around 54″ off the floor), and the highest usable shelf is roughly what you can reach without a stool. If anyone in the house is notably tall or short, it is fair to nudge counter and upper heights — just keep it consistent across the kitchen so it still reads as one design.
If people will sit at the island, three numbers decide whether they are comfortable or perched. Give each stool 12″ of countertop overhang for knees — 15″ if it is where the family eats — and about 24″ of island edge per person so shoulders are not touching. Behind them, keep 36″ of clear floor to pull a stool out, and 44–60″ if that stretch is also a walkway. Match the stool to the surface: a 36″ island takes counter-height stools with a 24–26″ seat; a raised 42″ bar takes 28–30″ bar stools. Anything past roughly 12″ of unsupported stone wants a corbel or a steel bracket underneath — ask the fabricator before you commit to the drawing.
Keep the numbers from measuring in front of you: 42–48″ walkways, 36–42″ between an island and a run, and door-swing room for every appliance. A layout that ignores clearances looks great on paper and fights you every day.
This is the step that used to need a designer. Drop your walls and openings into Flip’s free 3D planner, start from a layout template, and try cabinets, corners and colours in real time. You get an exact, buildable plan — cabinet sizes, filler locations, a cut-ready list — and a photoreal preview of the finished room, before you spend anything. It is the difference between “I think it fits” and knowing it does.
An arrangement that keeps the sink, stove and fridge a comfortable few steps apart — roughly 4 to 9 feet per leg — and out of the main walkway, so the three things you use most are efficient to move between.
Plan a corner solution at design time: a lazy Susan rotating shelf, a blind-corner pull-out that swings the hidden half out to you, or a diagonal cabinet that faces the corner. Retrofitting later is difficult, so decide it now.
36 to 42 inches, so drawers and the dishwasher can open and people can pass. Go toward 42 if two people cook at once.
For most base cabinets, deep drawers beat doors — you see and reach everything without kneeling. Keep full-height doors for the pantry and hidden appliances.
Counters sit around 36 inches; wall cabinets start 15 to 18 inches above the counter, with their bottoms about 54 inches off the floor. Adjust for height if needed, but keep it consistent.
Both, often. Open shelves feel airy, cost less and keep everyday plates in reach — but they show everything and gather kitchen grease. Closed uppers hide clutter, protect contents and store far more. A popular DIY compromise: closed cabinets by the fridge and pantry for bulk storage, with a run of open shelves on the cooking wall.
To the ceiling if you can. You gain a full shelf of storage, you lose the dust ledge, and the room reads taller. The costs: the top shelf needs a step stool, and you may need 42″ wall cabinets instead of 30 or 36″, or a stacked row, or crown molding to close the last few inches. Leave a gap only where a soffit or bulkhead hides ducting you cannot move — then finish it deliberately with trim or a filler panel rather than leaving a raw ledge.
Decide it on the plan, not on install day. A door is hinged left or right — hinges on the left means it swings open to the right. Three rules cover almost every kitchen: swing away from the range, oven and dishwasher so an open door never blocks the appliance you just opened; swing out of walkways; and next to a corner, swing away from the return wall so the door has room to clear. Pairs mirror each other — hinges outside, handles meeting in the middle.
Allow 30″ from the cooking surface to the bottom of an unprotected cabinet; 24″ is the floor, and only with a listed hood or a non-combustible liner underneath. A range hood normally mounts 24–30″ above gas and 20–24″ above electric — follow the hood’s own instructions, because mounting it higher kills its capture and mounting it lower is a fire risk. Design this gap first, then let the cabinet above it be whatever height is left over.
The classic corner clash: a drawer or door that starts right at an inside corner catches the neighbouring run’s pull as it comes out. Fixes, cheapest first — swap the offending front to a knob or a low-profile pull; move the pull further from the corner (a vertical pull on a drawer front is perfectly normal); or add a 3″ corner filler so the drawer starts clear of the return. On a drawing this costs nothing, which is exactly why corner fillers exist. Check every inside corner and every cabinet next to an appliance handle while you are still planning.
Plan 12″ of countertop overhang for knees at a standard 36″ island — 15″ if people will sit there for a whole meal. Allow roughly 24″ of island edge per stool so shoulders are not touching, and keep at least 36″ of clear floor behind the seats to pull a stool out, or 44–60″ if that is also a walkway. Anything past about 12″ of unsupported stone needs corbels or a steel bracket underneath — ask the fabricator before you design it.
Match the stool to the surface, not the room. A standard 36″ island takes counter-height stools with a seat around 24–26″; a raised 42″ bar top takes bar stools at 28–30″. The comfort rule is 10–12″ between the seat and the underside of the counter. A two-level island — work counter at 36″, raised bar at 42″ — hides prep mess from the seating side, at the cost of a bulkier profile.
Start from a layout template, arrange your cabinets, and see it come to life — free, in your browser, with a real cut-ready plan at the end.
Open the 3D planner →